![background image](http://html.mh-extra.com/html/icom/ic-a15/ic-a15_instruction-manual_612388024.webp)
■
“TAG” channel setting
Memory channels can be set to be skipped for a memory
channel scan. The “TAG” channel function is only selectable
in the scan mode.
For the IC-A15
q
Push
[MR]
to enter the memory mode.
• Select the BANK.
w
Select the memory channel to be a “TAG” channel.
• Select the BANK.
e
Push
[FUNC]
, then push
[TAG](9)
to set a “TAG.”
• “TAG” appears.
• Non-“TAG” channels are skipped during the scan.
r
To cancel the “TAG” setting, repeat the above steps.
For the IC-A15S
q
Push
[MR]
to enter the memory mode.
w
Select the memory channel to be a “TAG” channel.
e
Hold down
[LIGHT]
for 2 seconds to set a “TAG.”
r
To cancel the “TAG” setting, repeat the above steps.
■
Memory scan
NOTE:
Enter 2 or more memory channels with a “TAG”
setting to start a memory scan.
q
Push
[MR]
to enter the memory mode.
• For the IC-A15, select the BANK. (p. 12)
w
Push
[SQL
Y
]
/
[SQL
Z
]
to set the squelch level to the point
where noise just disappears.
For the IC-A15
e
Push
[FUNC]
, then push
[SCAN](2)
to start the scan.
• When a signal is received, the scan pauses until the signal dis-
appears.
• To change the scanning direction, push
[
Y
]
/
[
Z
]
.
For the IC-A15S
e
Hold down
[
Y
]
/
[
Z
]
for 1 second to start the scan.
• When a signal is received, the scan pauses until the signal dis-
appears.
• To change the scanning direction, push
[
Y
]
/
[
Z
]
.
19
5
SCAN OPERATION
No “ ” icon appears
with the skipped channel.
The “ ” icon appears with
the scanned channel.
Decimal point blinks during a
scan.
[FUNC]
[MR]
[SCAN](2)
[
Y
]
[
Z
]
r
To stop the scan, push
[CLR]
.