Icom IC-905 Advanced Manual Download

Page: 95 / 215

GPS OPERATION (ADVANCED)

9-18

Transmitting NMEA data

Setting a GPS message

Enter a GPS message to be transmitted with the

position data�

Example:

Entering “Japan TOM”

1�

Open the NMEA SET screen.

GPS > GPS TX Mode >

NMEA

2�

Touch “GPS Message.”

3�

Touch [EDIT].

4�

Enter a GPS message of up to 20 characters.

5�

After entering, touch [ENT].

6�

To close the “GPS Message” screen, push

several times.

GPS Automatic Transmission

NOTE:

•

Use the GPS Automatic Transmission function in only

the Simplex mode.

•

Using the function through a Repeater may interfere

with other communications.

You can set the GPS Automatic Transmission function

in the following menu.

» GPS >

GPS Auto TX

If you set this function, GPS data is automatically

transmitted according to the set time.

This function is not activated if your call sign (MY) is not

entered in the transceiver.

If “GPS TX Mode” is set to “NMEA” and “Position Input” is

set to “Manual,” this function is not activated.

» GPS > GPS Set >

Position Input

Summary of Contents for IC-905
























































































































































































































Search results

Summary of Contents for IC-905

Reviews:

Related manuals for IC-905

Brands by name

Popular brands

Icom IC-905, Advanced Manual

Search results

Summary of Contents for IC-905

Reviews:

Related manuals for IC-905

Brands by name

Popular brands