12
ABOUT THE DV GATEWAY FUNCTION
12-16
Terminal mode operation
Example: Making a Gateway CQ call
1� Touch “TO�”
2� Touch “Gateway CQ�”
3� Select the repeater group where your destination
repeater is listed� (Example: 12: Japan)
4� Select your destination repeater� (Example: Hirano)
• Returns to the DR screen, and selected repeater
name is set in “TO�”
5� Hold down [PTT] to transmit�
• While transmitting, the TX indicator lights orange�
L
While receiving a signal through the Internet, you
cannot transmit�
6� Release [PTT] to receive�
L
If you do not receive a reply, see page 12-23 for tips
on how to solve the problem�
Example: Making a call to a specific station
1� Touch “TO�”
2� Touch “Your Call Sign�”
3� Select your destination station� (Example: Rick)
• Returns to the DR screen, and the selected name is
set in “TO�”
4� Hold down [PTT] to transmit�
• While transmitting, the TX indicator lights orange�
L
While receiving a signal through the Internet, you
cannot transmit�
5� Release [PTT] to receive�
L
If you do not receive a reply, see page 12-23 for tips
on how to solve the problem�
D
Operating in the Terminal mode
NOTE:
In the Terminal mode, you can make a
Gateway CQ call, or a call to a specific station, using
call sign routing�
L
You cannot make a call if you select “Local CQ” or
“Reflector.”
