Icom IC-905 Advanced Manual Download Page 162

Page: 162 / 215

D-STAR OPERATION (ADVANCED)

11-30

Entering new information into the repeater list

Deleting repeater data

1 Open the REPEATER GROUP screen

> DV/DD MEMORY >

Repeater List

2 Touch a repeater group where the repeater you

want to delete is listed (Example: 12: Japan)

3 Touch a repeater that you want to delete for 1

second (Example: Hirano)

4 Touch “Delete”

•

The confirmation dialog is displayed.

5 Touch [YES]

• The selected repeater contents are deleted from the

repeater list, and returns to the selected repeater

group screen

6 To close the Repeater List screen, push

several times

NOTE:

The currently selected repeater on the DR

screen cannot be deleted To delete the repeater,

select another repeater on the DR screen

Summary of Contents for IC-905
























































































































































































































Search results

Summary of Contents for IC-905

Reviews:

Brands by name

Popular brands

Icom IC-905, Advanced Manual

Search results

Summary of Contents for IC-905

Reviews:

Brands by name

Popular brands