manualshive.com logo in svg

Icom IC-905, Advanced Manual

Share
Download
Icom IC-905 Advanced Manual Download Page 161

11

D-STAR OPERATION (ADVANCED)

11-29

Entering new information into the repeater list

 

D

Editing repeater data

You can edit repeater data This is useful when 

already-entered data is incorrect, has changed, or 

some data needs to be added to the list

1  Open the REPEATER GROUP screen 

 »

2

 > DV/DD MEMORY > 

Repeater List

2  Touch a repeater group where the repeater you 

want to edit is listed (Example: 12: Japan) 

3  Touch a repeater that you want to edit for 1 

second (Example: Hirano) 

4  Touch “Edit” 

 • The REPEATER LIST EDIT screen is displayed

5  Touch an item, then edit it

 

L

See pages 11-26 ~ 11-28 for details

6  After editing, touch “<<Overwrite>>” 

 •

The confirmation dialog is displayed.

7  Touch [YES] 

 • The edited contents are saved into the repeater list, 

and returns to the selected repeater group screen

8  To close the Repeater List screen, push 

 

several times

NOTE:

 The currently selected repeater on the DR 

screen cannot be edited To edit the repeater, select 

another repeater on the DR screen

Summary of Contents for IC-905
























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands