11-5
11
MEMORY OPERATION
■
Copying Memory contents
The frequency and operating mode in a memory chan-
nel can be copied to the VFO.
Copying can be performed in either the VFO or Mem
-
ory mode.
D
Copying in the VFO mode
This is useful for copying Memory contents to the VFO
mode.
Push [V/M] to select the VFO mode.
q
w
Push M-CH
[
p
] or
M-CH
[
q
]
to select the memory
channel to be copied.
• The
Memory list screen
is convenient for selecting the
desired channel.
• Memory channel contents appear in the memory chan
-
nel readout (below the frequency readout).
• “--.---.--” appears if the selected memory channel is a
blank channel. In this case, there is nothing to copy.
e
Hold down [V/M] for 1 second to copy the frequency
and operating mode to the VFO.
• The displayed frequency and operating mode are cop
-
ied to the VFO.
D
Copying in the Memory mode
This is useful for copying frequency and operating
mode while operating in the Memory mode.
When you have changed the frequency or operating
mode in the selected memory channel:
•
Displayed
frequency, mode and filter setting are
copied to the VFO mode.
•
Memorized
frequency and mode in the memory
channel are not changed, and they remain in the
memory channel.
q
Select the memory channel to be copied by pushing
M-CH
[
p
] or
M-CH
[
q
]
in the Memory mode.
• Enter the frequency or operating mode, if required.
w
Hold down [V/M] for 1 second to copy the frequency
and operating mode.
• The displayed frequency and operating mode are cop
-
ied to the VFO.
e
To return to the VFO mode, push [V/M].
M-CH [
�
] or [
�
]
[V/M]
[MAIN DIAL]
or
Hold down for 1 second.
Beep
Beep
Beep
Hold down for 1 second.
Beep
Beep
Beep
Programmed contents appear.
[EXAMPLE]:
Copying in the VFO mode
Operating frequency: 21.320 MHz/USB (VFO)
Contents of M-ch 16: 14.108 MHz/CW
[EXAMPLE]:
Copying in the Memory mode
VFO frequency:
21.320 MHz/USB
Contents of M-ch 16: 14.108 MHz/CW
