8
SET MODE
8-10
USB Flash Drive
MENU
» SET >
USB Flash Drive
Load Setting
Selects the saved data file to load.
Save Setting
Saves the setting data onto a USB flash drive.
USB Flash Drive Info
Displays the USB flash drive capacity and the time
remaining for voice recording.
Screen Capture View
Displays the selected screen capture.
Firmware Update
Displays the Firmware Update mode.
Format
Formats the USB flash drive.
If you use a brand new USB flash drive, be sure to
format it in the transceiver.
Unmount
Unmounts the USB flash drive.
Before you remove a flash drive when the transceiver
is ON, be sure to electrically unmount it. Otherwise
the data may be corrupted or deleted.
Format
Formats the SD card.
If you use a brand new SD card, be sure to format it in
the transceiver.
Unmount
Unmounts the SD card.
Before you remove a card when the transceiver is ON,
be sure to electrically unmount it. Otherwise the data
may be corrupted or deleted.
Others
MENU
»
SET > Others >
Information
Version
Displays the transceiver firmware’s version number.
MENU
» SET >
Others
Touch Screen Calibration
Touch to adjust the touch screen.
L
See the
Advanced Manual
for details.
MENU
»
SET > Others >
Reset
Partial Reset
Resets operating settings to their default values (VFO
frequency, VFO settings, menu contents) without
clearing the items below:
•Memory channel contents
•MY Call
•Memory Keyer
•RTTY memory
•User Band Edge
•
REF Adjust
•
Fixed Edges
L
See “Resetting” (p.10-1) for details.
All Reset
Clears all data and returns all settings to their factory
defaults.
Memory channel contents, filter setting and so on
will all be cleared, so you will need to rewrite your
operating settings.
L
See “Resetting” (p. 10-1) for details.
MENU
»
SET > Others >
Emergency
Emergency
Enters the Emergency mode by touching “Tuner.”
L
SD Card (Continued)
