3
BASIC OPERATION
3-1
When first applying power
Before turning ON your transceiver for the first time,
make sure all connections are correctly made.
TIP
: When you turn OFF the transceiver, it saves the
current settings. Therefore, when you turn ON the
transceiver again, it starts with the same settings.
z
To turn ON the transceiver, push
POWER
.
z
To turn OFF the transceiver, hold down
POWER
for
2 seconds until “POWER OFF...” is displayed.
Turning power ON or OFF
Rotate
AF
RF/SQL
(inner) to adjust the volume level.
Adjusting the volume level
Selecting the VFO and Memory modes
VFO mode
You can set a frequency by rotating
MAIN DIAL
.
L
Using the VFO mode may be easier for the first
initial operation.
Memory mode
You can recall a frequency that you have memorized
on the MEMORY list.
Selecting the VFO mode or Memory mode
1. Push
QUICK
.
•
The QUICK MENU screen is displayed.
2. Touch “VFO/MEMORY.”
3. Touch [VFO] or [Memory] to select the mode.
VFO indicator
After all connections are made, set the dials to the
positions described below.
q
w
e
r
t
y
q
MAIN
AF
RF/SQL
(inner): Fully counterclockwise
w
MAIN
AF
RF/SQL
(outer): 12 o’clock
e
SUB
AF
RF/SQL
(inner): Fully counterclockwise
r
SUB
AF
RF/SQL
(outer): 12 o’clock
t
KEY
SPEED
PITCH
(inner): Fully counterclockwise
y
KEY
SPEED
PITCH
(outer): 12 o’clock
VFO mode screen
Memory channel number
Memory mode screen
4. Push
EXIT
to close the VFO/MEMORY screen.