63
7. MEMORY OPERATION
Entering a memory name
Except for the blank channels, you can assign a
name to all memory channels, including scan edges.
The names will be displayed along with the frequency,
mode and ilter number.
1. Display the MEMORY screen.
MENU
»
MEMORY
2. Rotate
MULTI
to select the channel to enter a
name. (Example: Memory channel 2)
3. Touch
of the selected channel.
4. Touch “Edit Name.”
5. Enter a name, and then touch [ENT].
(Example: #1DX Spot)
Memory name
6. To close the MEMORY screen, push
EXIT
.
Memory name
L
The Memory name is not displayed when the Mini
scope screen or expanded screen is displayed.
L
You can also select not to display the Memory name
on the standby screen.
MENU
» SET > Display >
Memory Name