![background image](http://html.mh-extra.com/html/icom/ic-7610/ic-7610_advanced-manual_612314048.webp)
42
4. VOICE RECORDER FUNCTIONS
Recording a QSO audio
This transceiver is equipped with a QSO recorder not
only for the receive audio, but also for the transmit
audio.
This function is useful to make a QSO record or
to conirm your QSO with a rare entity’s station or
on a DX’pedition. You can also use the function to
repeatedly send the same message.
The recorded contents are saved onto an SD card.
NOTE:
• To record a QSO, an SD card (user supplied) is required.
• If your SD card does not have an “IC-7610” folder, back
up any data on the SD card, insert it in the transceivers
card slot and then format it using the built-in format
function.
• Once the recording starts, recording will restart after the
transceiver is turned OFF and ON again.
• The recording continues until you touch <<REC Stop>>
or the free space on the SD card has run out.
•
When the recording ile’s content becomes 2 GB, the
transceiver continues to record, but to a new ile.
When the PTT Automatic Recording function,
“PTT Auto REC” is set to
ON in RECORDER SET,
the recording automatically starts when you start
transmitting.
REC
QUICK
MENU
There are 3 ways to start recording.
z
Hold down
REC
for 1 second.
z
Push
QUICK
and select “REC Start.”
z
Push
MENU
and touch [RECORD].
L
The recorded audio is saved in the “Voice” folder on
the SD card.
TIP: About the icons
• While recording, “
●
” is displayed
under the clock readout and the SD
card indicator next to the SD card
slot blinks blue.
• While pausing, “
〓
” is displayed.
MENU
» RECORD > Recorder Set >
PTT Auto REC
D
Using the [REC] key
z
Hold down
REC
for 1 second to start recording.
L
To stop recording, hold down
REC
for 1 second
again.
L
You can change the recorder settings on the
RECORDER SET screen (p. 47).
D
Using the [QUICK] key
1. Push
QUICK
.
2.
Touch [<<REC Start>>] to start recording.
D
Using the MENU screen
1. Display the QSO RECORDER screen.
MENU
»
RECORD
2.
Touch “<<REC Start>>” to start recording.
• “Recording Started” is displayed for 1 second.
3. To stop recording, touch “<<REC Stop>>.”
L
The “<<REC Stop>> is displayed while recording
instead of “<<REC Start>>.”
4. To close the QSO RECORDER screen,
push
EXIT
.