Icom IC-7600, Instruction Manual, Page: 95 / 196

86
4
RECEIVE AND TRANSMIT
4
HF SSB (600Hz – ) SHARP
Select the filter shape for the SSB mode in HF
bands.
The set filter shape is automatically used only
when the IF filter is set to 600 Hz or wider.
SSB-(600Hz – ) SHARP
Select the filter shape for the SSB data mode in HF
bands.
The set filter shape is automatically used only
when the IF filter is set to 600 Hz or wider.
CW ( – 500Hz) SHARP
Select the filter shape for the CW mode in HF
bands.
The set filter shape is automatically used only
when the IF filter is set to 500 Hz or narrower.
CW (600Hz – ) SHARP
Select the filter shape for the CW mode in HF
bands.
The set filter shape is automatically used only
when the IF filter is set to 600 Hz or wider.
50M SSB (600Hz – ) SOFT
Select the filter shape for the SSB mode in 50 MHz
band.
The set filter shape is automatically used only
when the IF filter is set to 600 Hz or wider.
SSB-(600Hz – ) SHARP
Select the filter shape for the SSB data mode in
50 MHz band.
The set filter shape is automatically used only
when the IF filter is set to 600 Hz or wider.
CW ( – 500Hz) SHARP
Select the filter shape for the CW mode in 50 MHz
band.
The set filter shape is automatically used only
when the IF filter is set to 500 Hz or narrower.
CW (600Hz – ) SHARP
Select the filter shape for the CW mode in 50 MHz
band.
The set filter shape is automatically used only
when the IF filter is set to 600 Hz or wider.
D Filter shape set mode
The type of DSP filter shape for SSB, SSB data and
CW can be selected independently from soft and
sharp.
Hold down
q
[FILTER] for 1 second to select the filter
set screen.
Hold down
w
[SHAPE] (F-6) for 1 second to select
the filter shape set mode.
Select the desired item using
e
[ Y ] (F-1) or [ Z ] (F-2).
Rotate the main dial to select the filter shape from
r
soft and sharp.
• Hold down
[DEF] (F-4)
for 1 second to select a default
value.
Push
t
[EXIT/SET] to exit filter shape set mode.
• Filter shape set mode