manualshive.com logo in svg

Icom IC-7600, Instruction Manual, Page: 167 / 196

Share
Download
Icom IC-7600 Instruction Manual Download Page 167

 

■

About protection displays

The IC-7600 has a 2-step protection function to 
protect the final power amplifiers.
The protector monitors the power amplifier 
temperature and activates when the temperature 
becomes extremely high.

• Reduced power transmission
  Reduces the transmit output power to 50 W.
   “LMT” appears beside the TX indicator (p. 14) 

during transmit.

• Transmission inhibit
   Deactivates the transmitter. 
   The TX indicator (p. 14) is displayed in gray during 

transmit.

   When the protector is activated, wait until the 

power amplifier cools down, using the transceiver 
in only stand-by or receive mode.

NOTE: DO NOT turn the transceiver power OFF 
when the protector is ON. If you do, the cooling fan 
will not function and it will take longer to cool the 
transceiver.

The power amplifier temperature can be monitored in 
the multi-function meter, TEMP gauge.

 

■

Screen saver function

The IC-7600 has a screen saver function to protect 
the LCD from the “burn-in” effect.

q

  Push 

[EXIT/SET] several times to close any multi-

function screens.

w

  Push 

[SET] (F-6) to select the set mode menu 

screen.

e

 Push 

[DISP] (F-3) to select the display set mode.

r

  Push 

[

Y

] (F-1) or [

Z

] (F-2) several times to select 

the “Screen Saver Function” item.

t

  Rotate the main dial to select the desired time 

period for the screen saver activation from 15, 30, 
60 minutes and OFF.

  • Deactivate the screen saver with “OFF” selection.

y

  Push 

[

Z

] (F-2) to select the “Screen Saver Type” 

item.

u

  Rotate the main dial to select the screen saver type 

from “Bound,” “Rotation” and “Twist.”

  •  Hold down 

[PREVIEW] (F-5) to display the pattern for 

your reference.

i

  Push 

[EXIT/SET] twice to exit the set mode.

NOTE: When the screen saver function is 
activated, the LCD unit brightness is set to dark 
(0%), and the indicator on the 

[NR] switch blinks.

158

11

MAINTENANCE

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21

Check the temperature

F-1

F-2

F-3

F-6

DISP

EXIT/SET

Main dial

SET

F-5

PREVIEW

When “Twist” is selected

Summary of Contents for IC-7600





































































































































































































Reviews:

No comments