Icom IC-7600 Instruction Manual Download Page 154

Page: 154 / 196

145

SET MODE

■

File loading

By loading the saved setting file from the USB-
Memory, you can easily set up another IC-7600 or
apply the several operators settings to one IC-7600.

During the set mode menu screen display, push

[USB] (F-6) to select the USB set menu screen.

Push

[LOAD] (F-1) to select setting load screen.

Hold down

[LOAD/OPT] (F-4) for 1 second to

select the load option set mode, then rotate the
main dial to set the desired loading conditions, if
desired.

• See page 146 for details.

Push

[EXIT/SET] to set.

Push

[

] (F-2) or [

] (F-3) to select the desired

setting file.

Push

[LOAD/OPT] (F-4).

• Confirmation screen appears.

Push

[OK] (F-5) to starts loading.

• After the loading is completed, the message dialog,

“Reboot the IC-7600,” appears.

Turn the transceiver power OFF then ON to make

the setting effective.

F-1

F-2

F-3

F-5

F-4

F-6

EXIT/SET

Main dial

USB

LOAD/OPT

LOAD

Summary of Contents for IC-7600





































































































































































































Search results

Summary of Contents for IC-7600

Reviews:

Icom IC-7600, Instruction Manual, Page: 154 / 196

Search results

Summary of Contents for IC-7600

Reviews: