Icom IC-7600, Instruction Manual, Page: 127 / 196

■
Setting select memory channels
118
7
SCANS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
EXIT/SET
F-3
F-5 F-1 F-2
VFO/MEMO
SCAN
SELECT
F-4
MEMORY
ROLL SET
• Scan screen
• Memory list screen
F-5
SCAN
F-3
SELECT
F-1 F-2 F-3
★
1
★
1
★
2
★
3
F-4
★
1,2,3
F-4
MEMORY
EXIT/SET
D Setting in scan screen
q
Push [EXIT/SET] several times to close any multi-
function screens, if necessary.
w
Select memory mode.
e
Push [SCAN] (F-5) to select the scan screen.
r
Select the desired memory channel to set as a
select memory channel.
• [ ∫ ]/[ √ ] keys and direct keypad selections can be used.
(p. 107)
t
Push [SELECT] (F-3) several times to set the
memory channel as a select memory
★
1,
★
2,
★
3
or not.
• “
★
1,” “
★
2” or “
★
3” appears on the LCD to show that the
channel is specified as the select memory.
y
Repeat steps
r
to
t
to program another memory
channel as a select memory channel.
u
Push [EXIT/SET] to exit the scan screen.
D Setting in memory list screen
q
Push [EXIT/SET] several times to close any multi-
function screens, if necessary.
w
Push [MEMORY] (F-4) to select memory list
screen.
e
Rotate the main dial while pushing [ROLL] (F-1) or
[SET] (F-2) to select the desired memory channel.
• [ ∫ ]/[ √ ] keys and direct keypad selections can be used.
(p. 107)
r
Push [SELECT] (F-3) several times to set the
memory channel as a select memory
★
1,
★
2,
★
3
or not.
• “
★
1,” “
★
2” or “
★
3” appears on the LCD to show that the
channel is specified as the select memory.
t
Repeat steps
e
to
r
to program another memory
channel as a select memory channel.
y
Push [EXIT/SET] to exit the memory list screen.
D Erasing the select scan setting
q
Push
[EXIT/SET] several times to close any multi-
function screens, if necessary.
w
Push [MEMORY] (F-4) to select memory list
screen, or push [SCAN] (F-5) to select scan
screen.
e
Hold down
[SELECT] (F-3) for 1 second to display
memory select all clear window.
r
Push one of the following keys to clear all select
scan settings.
[
★
1] (F-1)
: Clears all
★
1 settings.
[
★
2] (F-2)
: Clears all
★
2 settings.
[
★
3] (F-3)
: Clears all
★
3 settings.
[
★
1,2,3] (F-4) : Clears all select settings.
t
Push
[EXIT/SET] to exit the memory list screen.