Icom IC-7600, Instruction Manual, Page: 126 / 196

■
Memory scan operation
q
Push
[EXIT/SET] several times to close any multi-
function screens, if necessary.
w
Select memory mode.
e
Push
[SCAN] (F-5) to select the scan screen.
r
Set
[RF/SQL] open or closed.
• See page 113 for squelch condition.
• If the
[RF/SQL] control function is set as “AUTO,” the
squelch is always open in the SSB, CW, RTTY and
PSK modes. (pp. 2, 37, 136)
t
Push
[MEMO] (F-1) to start the memory scan.
• “ ” and decimal points blink while
scanning.
y
When the scan detects a signal, the scan stops,
pauses or ignores it depending on the resume
setting and the squelch condition.
u
To cancel the scan, push
[MEMO] (F-1).
• Rotating the main dial also cancels the scan.
2 or more memory channels must be programmed
for a memory scan to start.
117
7
SCANS
F-1 F-5 EXIT/SET
Main dial
[RF/SQL]
SCAN MEMO
F-3
SELECT
F-1
F-4 F-5
EXIT/SET
Main dial
[RF/SQL]
SCAN
MEMO
SEL No.
q
Push [EXIT/SET] several times to close any multi-
function screens, if necessary.
w
Select memory mode.
e
Push [SCAN] (F-5) to select the scan screen.
r
Set [RF/SQL] open or closed.
• See page 113 for squelch condition.
• If the
[RF/SQL] control function is set as “AUTO,” the
squelch is always open in the SSB, CW, RTTY and
PSK modes. (pp. 2, 37, 136)
t
Push [MEMO] (F-1) to start the memory scan.
• “ ” and decimal points blink while
scanning.
y
Push [SEL No.] (F-4) several times to select the
select scan number from
★
1,
★
2,
★
3 and
★
1,2,3.
u
Push [SELECT] (F-3) to start select memory scan,
push [SELECT] (F-3) again to return to memory
scan, if desired.
• “ ” blinks instead of
“ ” during a select memory scan.
i
When the scan detects a signal, the scan stops,
pauses or ignores it depending on the resume
setting and the squelch condition.
o
To cancel the scan, push [MEMO] (F-1).
• Rotating the main dial also cancels the scan.
2 or more memory channels must be designated
as select memory channels, as well as the same
select scan channel number, for select memory
scan to start.
■
Select memory scan operation