Icom IC-7600, Instruction Manual, Page: 117 / 196

■
Memory list screen
108
6
MEMORY OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
SET
EXIT/SET
Main dial
F-2
ROLL
F-1
q
Select the memory list screen as described above.
w
While pushing
[ROLL] (F-1), rotate the main dial to
scroll the screen.
e
Push
[SET] (F-2) to select the highlighted memory
channel.
• “ ≈ ” appears beside the selected memory channel
number in the memory list screen and the selected
memory channel contents are displayed below the
frequency readout.
r
Push
[EXIT/SET] to exit the memory list screen.
D Confirming programmed memory channels
• Memory list screen
MEMORY
WIDE
SET
EXIT/SET
Main dial
F-2 F-4
F-6
q
Push [EXIT/SET] several times to close any multi-
function screens.
w
Push [MEMORY] (F-4) to select the memory list
screen.
• Push [WIDE] (F-6)
to
switch between the standard and
wide screens.
e
While holding down [SET] (F-2), rotate the main
dial to select the desired memory channel.
• [ ∫ ] and [ √ ] can also be used.
r
Push
[EXIT/SET] to exit the memory list screen.
D Selecting a memory channel using the memory list screen
The memory list screen simultaneously shows 7
memory channels and their programmed contents.
13 memory channels can be displayed in the wide
memory list screen.
You can select a desired memory channel from the
memory list screen.