![background image](http://html2.mh-extra.com/html/icom/ic-7300/ic-7300_information_4113717006.webp)
6
■
MIC Key Customize function
You can change the microphone’s [UP]/[DOWN] keys
function.
MENU
» SET > Function >
MIC Key Customize
[UP]
(Default: UP (VFO: kHz))
[DN]
(Default: DOWN (VFO: kHz))
Function
Description
---
No function
UP
Push to increase the frequency (in 50 Hz
steps*), or Memory channel.
* When the Tuning Step function is ON,
increases the frequency in the selected
Tuning Step.
DOWN
Push to decrease the frequency (in 50 Hz
steps*), or Memory channel.
* When the Tuning Step function is ON,
increases the frequency in the selected
Tuning Step.
UP
(VFO: kHz)
Push to increase the frequency (in 1 kHz
steps*), or Memory channel.
* When the Tuning Step function is ON,
increases the frequency in the selected
Tuning Step.
DOWN
(VFO: kHz)
Push to decrease the frequency (in 1 kHz
steps*), or Memory channel.
* When the Tuning Step function is ON,
increases the frequency in the selected
Tuning Step.
XFC
While holding down the key, the transceiver
monitors signals.
VFO/MEMO
•Push to select the VFO mode and the
Memory mode.
•Hold down for 1 second to copy a Memory
channel contents to the VFO.
BAND UP
In the VFO mode
•Push to increase an operating band.
•Hold down for 1 second to recall the Band
Stacking Register contents.
BAND
DOWN
In the VFO mode
•Push to decrease an operating band.
•Hold down for 1 second to recall the Band
Stacking Register contents.
SPEECH
Push to announce the S-meter level,
frequency, or operating mode.
L
In the VFO or Memory mode, the frequency
and the operating mode are announced.
L
S-meter level is announced only when the
S-level SPEECH function is ON.
MODE
•Push to select the operating mode.
•Hold down to toggle USB and LSB, CW and
CW-R, or RTTY and RTTY-R.
Function
Description
Voice/
Keyer/
RTTY
Memory 1
In the SSB, AM, or FM mode
•Push to transmit the voice audio recorded
on the SD card once.
•Hold down for 1 second to repeatedly
transmit the voice audio.
L
If the voice audio is not saved in the Voice
TX memory (T1 ~ T4), this function is
disabled.
In the CW mode
•Push to transmit the Keyer memory content
once.
•Hold down for 1 second to repeatedly
transmit the memory content.
L
If the Keyer memory content (M1 ~ M4) is
not entered, this function is disabled.
In the RTTY mode
Push to transmit the RTTY memory content
once.
L
If the RTTY memory content (RT1 ~ RT4) is
not entered, this function is disabled.
Voice/
Keyer/
RTTY
Memory 2
Voice/
Keyer/
RTTY
Memory 3
Voice/
Keyer/
RTTY
Memory 4
TS
•Push to turn the Tuning Step function ON or
OFF.
•Hold down for 1 second to open the TS
screen.
MPAD
•Push to sequentially call up the contents in
the Memo Pads.
•Hold down for 1 second to save the
displayed contents into the Memo Pad.
SPLIT
•Push to turn the Split function ON or OFF.
•Hold down 1 second to turn ON the Quick
Split function.
A/B
•Push to select the VFO A or VFO B.
•Hold down for 1 second to set the displayed
VFO’s frequency to the VFO that is not
displayed.
TUNER
•Push to turn the antenna tuner ON or OFF.
•While “TUNE” is displayed, hold down for 1
second to start manual tuning.