Icom IC-7300 Full Manual Download Page 54

Page: 54 / 174

RECEIVING AND TRANSMITTING

4-20

Operating CW (Continued)

Contest number menu (001 SET)

You can set the number style, count up trigger and

preset number.

Setting

1. Open the KEYER 001 menu in the CW mode.

MENU

» KEYER > EDIT/SET >

001 SET

2. Select the setting item.

(Example: Number Style)

3. Select the desired setting option.

Rotate

Push

KEYER 001 menu

•Returns to the KEYER 001 menu.

4. To close the “Number Style” screen, push

EXIT

several times.

TIP: How to reset to the default setting

Touching the item or its option for 1 second displays the

Quick menu, and then touch “Default” to reset to the

default setting.

Number Style

(Default: Normal)

Set the numbering system used for contest (serial)

numbers— normal or short morse numbers.

•

Select Normal, 190→ANO, 190→ANT, 90→NO or 90→NT.

Count Up Trigger

(Default: Normal)

Select which of the 8 memories will contain the

contest serial number exchange.

•Select between M1 and M8.

Present Number

(Default: 001)

Set the current number for the Count Up Trigger.

•Set to between 001 and 9999.

Previous view

Summary of Contents for IC-7300















































































































































































Search results

Summary of Contents for IC-7300

Reviews:

Related manuals for IC-7300

Brands by name

Popular brands

Icom IC-7300, Full Manual

Search results

Summary of Contents for IC-7300

Reviews:

Related manuals for IC-7300

Brands by name

Popular brands