10
SCANS
10-5
D
Select Memory scan operation
1. Start the Memory scan.
L
See steps 1 ~ 3 in “Memory scan operation” (p.10-4)
for details.
2. While scanning, touch [SEL No.] to select the
Select scan number.
L
Each time you touch [SEL No.], “
★
1,” “
★
2,” “
★
3,” and
“
★
1,2,3” are alternately displayed.
★
1: Channels specified as
★
1 are scanned.
★
2: Channels specified as
★
2 are scanned.
★
3: Channels specified as
★
3 are scanned.
★
1,2,3:
Channels specified as
★
1,
★
2, or
★
3 are
scanned.
3. While scanning, touch [SELECT] to switch to the
Select Memory scan.
Blinks
Blinks
While Memory scanning
While Select Memory scanning
L
While Select Memory scanning, “SELECT MEMORY
SCAN” blinks instead of “MEMORY SCAN.”
L
Each time you touch [SELECT], the Memory scan
and the Select Memory scan are switched.
4. Touch [MEMO] to cancel the scan.
5. To close the SCAN screen, push
EXIT
.
Memory scan and Select Memory scan (Memory mode) (Continued)
D
Setting Select Memory channel
1. Open the SCAN screen.
L
See steps 1 ~ 2 in “Memory scan operation” (p.10-4)
for details.
2. Push
▲
or
▼
to select the desired Memory
channel to be set as the Select Memory channel.
3. Touch [SELECT] to set the Select scan number.
L
Each time you touch [SELECT], “
★
1,” “
★
2,” “
★
3,” and
“(no icon)” are alternately displayed.
4. To close the SCAN screen, push
EXIT
.
Displayed
D
Canceling all Select Memory channel
settings
1. Open the SCAN screen.
L
See steps 1 ~ 2 in “Memory scan operation” (p.10-4)
for details.
2. Touch [SELECT] for 1 second.
• Opens the SELECT ALL CLEAR screen.
3. Touch the desired option to clear all Select
memory channel settings.
4. Touch [YES] to cancel the Select setting.
5. To close the SCAN screen, push
EXIT
.
Previous view
