8-5
8
SCAN OPERATION
■
Scanning Memory channels (Memory mode)
A Memory scan searches for signals through memory
channels 1 to 199. Blank (unprogrammed) memory
channels are skipped.
Push
q
V/M
➔
to select the Memory mode.
Close the squelch with the
w
[RF/SQL] control.
Push
e
SCAN
to start the scan.
• “
” appears while scanning.
When the scan detects a signal, the scan either
r
stops or pauses, depending on the resume set-
ting.
To cancel the scan, push
t
SCAN
.
• Rotating
[DIAL] during scan also cancels the scan.
NOTE: Two or more different memory channels
must be programmed for a memory scan to start.
[RF/SQL]
[DIAL]
Appears
Previous view