Icom IC-7100 Advanced Instructions Download

Page: 298 / 375

ANTENNA TUNER OPERATION

16-2

Connecting the antenna tuner

To Long wire

To optional AH-2b

Ground

AH-4

To [ANT1]

IC-7100

To [TUNER]

Ground*

ANT

Antenna
element

To [TRANSCEIVER]

To [ANT1]

To [ACC]

AT-180

To [ANT]

To [ACC]*

Ground

HF/6 m antenna

Coaxial cable supplied
with the AT-180

ACC cable supplied with the AT-180

Coaxial cable

Ground

IC-7100

*Either of the two

external connectors

* Use as thick and short a wire as possible

between the AH-4 and ground.

Connecting an AH-4

The optional AH-4 matches the IC-7100 to a long
wire antenna more than 7 m/23 ft long (3.5 MHz and
above).

• See page 16-4 for operation.
• See the AH-4 instructi

on manual installation and an-

tenna connection details.

The AH-4 and AT-180

automatic

antenna

tuner

au-

tomatically matches the IC-7100 to the connected an-
tenna.

NOTE:

Before connecting, be sure to turn OFF the

transceiver’s power.

Connecting an AT-180

The optional AT-180 matches the IC-7100 to both HF
and 50 MHz antenna, and automatically tunes the an-
tenna (impedance range: 16.7 to 150

) during trans-

mission when the antenna SWR is less than 1:3 (HF
band).

• See page 16-5 for operation.

Summary of Contents for IC-7100
























































































































































































































































































































































































Search results

Summary of Contents for IC-7100

Reviews:

Related manuals for IC-7100

Brands by name

Popular brands

Icom IC-7100, Advanced Instructions

Search results

Summary of Contents for IC-7100

Reviews:

Related manuals for IC-7100

Brands by name

Popular brands