12
SCAN OPERATION
12-10
D
Memory scan
A Memory scan searches for signals through Memory
channels 1 to 99.
Blank (unprogrammed) Memory channels are skipped.
NOTE:
For a Memory scan to start, two or more
Memory channels must be programmed. (p. 11-5)
Touch the Memory channel number indication once
q
or twice to select the Memory mode. (p. 3-4)
Push
w
MENU
(
C
) one or more times to select the “M-
1” (Menu 1) screen.
e
Touch [SCAN](
D
) to display the “SCAN” screen.
Touch [MEMO](
r
D
) to start the Memory scan.
• The MHz and kHz decimal points, and “MEMO SCAN”
blink while scanning.
• If “Up/Down” is selected as the “MAIN DIAL (SCAN)” op
-
tion in the Scan Set mode, rotating the Dial changes the
scanning direction. (p. 12-4)
Touch [MEMO](
t
D
) to cancel the scan.
While Memory scanning
Touch [SCAN]
Touch [MEMO]
Memory scan (Memory mode)
L
eft
R
ight
C
enter
D
isplay
The
L
,
R
,
C
or
D
in the
instructions indicate the
part of the controller.
L
: Left side
R
: Right side
C
: Center bottom
D
: Display (Touch screen)
Previous view
