9
D-STAR OPERATION <ADVANCED>
9-42
You can set unnecessary repeaters as scan skip tar-
gets. The selected repeaters are skipped during scan-
ning for faster selection and scanning.
You can set the skip setting to all repeaters in the se-
lected repeater group, or the individual repeater.
When a repeater is specified as a skip target, its
“USE (FROM)” setting is automatically set to “NO.” In
this case, the repeater cannot be selected in “FROM”
(Access repeater).
D
Individual skip setting
Push
q
SET
(
C
) to enter the Set mode.
Touch the “Repeater List” item of the “DV Memory”
w
Set mode.
DV Memory >
Repeater List
• If the specified item is not displayed, touch [
∫
] or [
√
](
D
)
one or more times to select the page
.
• The repeater groups are displayed.
Touch the repeater group that includes the repeater
e
you want to set the skip setting on.
• If the specified item is not displayed, touch [
∫
] or [
√
](
D
)
one or more times to select the page
.
Touch the repeater to be skipped during the DR
r
mode scan.
Touch the repeater to be skipped for 1 second.
t
Touch “SKIP.”
y
• “SKIP” appears on the selected repeater.
• Push
QUICK
(
C
) and select “SKIP” again to cancel the
skip setting.
• When “SKIP All ON” is selected, touch to set all repeaters
in the group as skip targets.
Select the re-
peater to set
the skip setting
Appears
Appears
Select the
repeater group.
Skip setting for the DR mode scan
D
Group skip setting
Push
q
SET
(
C
) to enter the Set mode.
Touch the “Repeater List” item of the “DV Memory”
w
Set mode.
DV Memory >
Repeater List
• If the specified item is not displayed, touch [
∫
] or [
√
](
D
)
one or more times to select the page
.
• The repeater groups are displayed.
Touch the repeater group to be skipped during the
e
DR mode scan for 1 second.
Touch “SKIP All ON.”
r
• “SKIP” appears on the selected repeater group.
• Push
QUICK
(
C
) again and select “SKIP All OFF,” then
touch to cancel the skip setting.
Touch
“Repeater List.”
Touch the
repeater for
1 second.
Touch the
repeater group
for 1 second.
Touch “SKIP.”
Touch
“SKIP All ON.”
Previous view