9
D-STAR OPERATION <ADVANCED>
9-36
Repeater list programming (Continued)
Position data accuracy level setting
11.
When the Repeater Search function is not used, or
the distance between your position and a repeater is
not displayed, select “OFF.”
$0
Touch “POSITION”.
$1
Touch the position data accuracy level.
• None:
Select when the repeater has no position
data.
• Approximate: Select when the programmed position data
is approximate.
• Exact:
Select when the programmed position data
is exactly correct.
Latitude programming
12.
This item appears only when “Approximate” or “Ex-
act” is selected in ‘11. Position data accuracy level
setting.’
$2
Touch “LATITUDE,” to enter the latitude data edit
mode.
• A cursor appears and blinks.
$3
Touch the desired number to input the latitude.
• Touch [CE](
D
) to delete the selected number.
•
Touch [
f
](
D
) to move the cursor backwards, or touch
[
g
](
D
) to move the cursor forwards.
• Touch [N/S](
D
) to toggle between N and S modes.
$4
After entering, touch [ENT](
D
).
Longitude programming
13.
This item appears only when “Approximate” or “Ex-
act” is selected in ‘11. Position data accuracy level
setting’.
$5
Touch “LONGITUDE,” to enter the longitude data edit
mode.
• A cursor appears and blinks.
$6
Touch the desired number to input the longitude.
• Touch [CE](
D
) to delete the selected number.
• Touch [
f
](
D
) to move the cursor backwards, or touch
[
g
](
D
) to move the cursor forwards.
• Touch [E/W](
D
) to toggle between E and W modes.
$7
After entering, touch [ENT](
D
).
☞
Continued on the next page.
Touch
“LATITUDE”
Touch
“POSITION”
Touch
“LONGITUDE”
Touch [ENT]
Touch [ENT]
Example:
“Approximate”
Previous view
