9
D-STAR OPERATION <ADVANCED>
9-32
Repeater call sign programming
4.
When used for simplex communication, go to
[7. Access repeater setting].
!6
Touch “CALL SIGN” to enter the repeater call sign
edit mode.
• A cursor appears and blinks.
!7
Touch the desired block one or more times to
select
the desired character or symbol.
• A to Z, 0 to 9, / and a space can be selected.
• Touch
“AB
⇔
12” to toggle between the Alphabet input
and Number input mode.
• Touch [CLR](
D
) to delete the selected character, symbol
or number.
• Touch “
” to input a space.
!8
Touch [
f
](
D
) to move the cursor backwards, or
touch [
g
](
D
) to move the cursor forwards.
!9
Repeat steps
!7
and
!8
to enter a call sign of up to 8
characters, including spaces.
@0
After entering the call sign, touch [ENT](
D
).
Information
✓
Be sure to add a repeater node (port) letter as the 8th
digit in the call sign field after a repeater call sign, ac-
cording to the repeater frequency band, as shown be-
low.
Note that Japanese repeater node letters are different.
1200 MHz: A (B in Japan)
430 MHz: B (A in Japan)
144 MHz: C (no D-STAR repeaters in Japan)
Cross band operation between different nodes at the
same repeater site can be made.
Example:
“JP1YYY A”
☞
Continued on the next page.
Repeater list programming (Continued)
Touch
“CALL SIGN”
Touch [ENT]
The
L
,
R
,
C
or
D
in the
instructions indicate the
part of the controller.
L
: Left side
R
: Right side
C
: Center bottom
D
: Display (Touch screen)
L
eft
R
ight
C
enter
D
isplay
Previous view
