7
D-STAR INTRODUCTION
7-2
IMPORTANT!
Before starting D-STAR, the following steps are needed.
STEP 1
Entering your call sign (MY) into the transceiver.
STEP 2
Registering your call sign
(MY) to a gateway repeater.
You have completed the steps!!
“MY” (Your own call sign) programming
You can store up to 6 “MY” call signs.
Example: Enter “JA3YUA” as your own call sign into the
MY call sign memory [MY1].
Display the My Call Sign Edit screen
1.
Push
q
SET
(
C
) to enter the Set mode.
Touch the “MY Call Sign” item of the “My Station” Set
w
mode.
My Station >
MY Call Sign
• If the specified item is not displayed, touch [
∫
] or [
√
](
D
)
one or more times to select the page.
Touch the desired call sign memory for 1 second.
e
(Example: 1:)
Touch the “Edit” item.
r
• The “MY CALL SIGN (MY
M
)” screen appears.
The memory number, selected in the step
e
, is dis-
played.
(Example: MY1)
The
L
,
R
,
C
or
D
in the instructions indicate the part of
the controller.
L
: Left side,
R
: Right side,
C
: Center bottom
D
: Display (Touch screen)
Continued on the next page
☞
Touch [
√
]
Touch
“My Station”
Touch
“MY Call Sign”
Touch the call
sign memory
for 1 second
(Example: 1:)
Touch
“Edit”
Previous view
