8-15
BASIC MANUAL
8
SET MODE
Display
» SET >
Display
LCD Backlight
(Default: 50%)
Sets the LCD backlight brightness.
L
When “(Auto Adjusting)” is displayed to the right
of the screen title, the backlight brightness is
automatically adjusted using the ambient light
sensor. Touching [Auto Adjust] turns this function
ON or OFF.
Screen Saver (Battery Pack)
(Default: 5min)
Screen Saver (DC 13.8 V)
(Default: 60min)
Sets the Screen Saver function when using the
battery pack and using using an external DC
power supply.
This function activates and automatically turns
OFF the screen when no operation is performed
for the preset period of time.
Screen OFF [POWER] Switch
(Default: ON)
Selects whether or not to turn OFF the screen
by pushing
.
•OFF: Pushing
does not turn OFF the
screen.
•ON: Pushing
turns OFF the screen.
L
When both “Screen Capture [POWER] Switch”
and “Screen OFF [POWER] Switch” are set to
ON, pushing
displays the dialog to select
“Screen OFF” or “Screen Capture.”
RX LED
(Default: ON)
Selects whether or not to light the TX/RX
indicator while receiving a signal, or the squelch
is open. To conserve battery power, turn OFF
this function.
L
The indicator lights red while transmitting,
regardless of the setting.
Meter Peak Hold
(Default: ON)
Turns the Meter Peak Hold function ON or OFF.
Memory Name
(Default: ON)
Turns the Memory name display in the Memory
mode ON or OFF.
Group Name Popup
(Default: ON)
Selects whether or not to display the group name
when you change the memory channel group.
RX Call Sign Display
(Default: Normal)
In the DV mode, selects whether or not to
display the call sign and the message of the
caller station when a call is received.
•OFF:
Does not display the caller station’s
call sign and message.
•Normal: The caller station’s call sign and
message automatically scroll once,
and then disappear.
•RX Hold: The caller station’s call sign and
message automatically scroll once,
and then the call sign is displayed
on the transceiver’s display until the
signal disappears.
•Hold:
The caller station’s call sign and
message automatically scroll once,
and then the call sign is displayed
on the transceiver’s display until the
signal disappears.
When the signal disappears, the
call sign and the message are each
repeatedly displayed for 2 seconds.
L
When “Normal,” “RX Hold,” or “Hold” is selected,
and if the call sign and name of the caller station
is programmed in your memory, the programmed
name is displayed after displaying the call sign.
RX Position Indicator
(Default: ON)
Selects whether or not to display the indicator
when position data is included in the signal
received in the DV mode.
•OFF: No indicator is displayed, even though
the position data is included in the
received signal.
•ON: The indicator is displayed when the
position data is included in the received
signal.
L
When “RX Call Sign Display” is set to “OFF,” the
indicator is not displayed, even though position
data is included in the received signal.
RX Position Display
(Default: ON)
Selects whether or not to display in a dialog
when the caller station’s position data is
included in the signal received in the DV mode.
•OFF: No data is displayed in a dialog.
•ON: When the caller station’s position data
is included in the signal, its data is
displayed in a dialog.
L
The time period to display the dialog depends on
the “RX Position Display Timer” setting.
Summary of Contents for IC-705
Page 95: ...VI BASIC MANUAL MEMO...
