Icom IC-705, Basic Manual, Page: 43 / 96

4-10
BASIC MANUAL
RECEIVING AND TRANSMITTING
4
4
Split frequency operation
Split frequency operation enables you to
transmit and receive on different frequencies in
the same band.
There are 2 ways to use Split frequency
operation.
• Use the Quick Split function
• Use the receive and transmit frequencies set to
VFO A and VFO B.
The other station Your station
Transmit frequency
USB mode
14.100 MHz
VFO A
Receive frequency
Receive frequency
USB mode
14.105 MHz
VFO B
Transmit frequency
D
Using the Quick Split function
The Quick Split function enables you to
automatically equalize the frequency and mode
of the VFOs to the displayed VFO, and activate
the Split function.
1. Set VFO A’s receive frequency and
operating mode.
(Example: 14.100 MHz in the USB mode)
2. Push .
• Opens the FUNCTION screen.
3. Touch [SPLIT] for 1 second.
• The Quick Split function is turned ON, and the
VFO A settings are set to VFO B.
4. While holding down , set the operating
frequency offset between transmit and
receive. (Example: 5.00 kHz)
VFO B
frequency is
displayed.
Displayed
The offset
between
transmit and
receive while
holding down
.