5
3
SET MODE
■
Using the Set mode
You can set seldom changed settings in the Set mode.
You can customize the transceiver settings to suit your
preference and operating style.
Example:
Turning OFF the key beep
■
Set mode item list
The list on this basic manual shows the transceiver’s Set
mode items.
See the ADVANCED MANUAL for each item’s details. You
can download the ADVANCED MANUAL from the Icom
website, shown below.
http://www.icom.co.jp/world/support/download/manual/index.php
The transceiver’s Set mode items may differ, depending on
the transceiver’s setting. Ask your authorized Icom dealer or
transceiver administrator for details.
• Set mode items
Squelch Level “SQL”
Auto Power OFF “AP-OFF”
Scan Mode “SCAN-M”
Signal Moni “SMON”
CTCSS/DTCS*
1
Horn “HORN”
Backlight “LIGT”
RX VFO “RX VFO”
Beep “BEEP”
Scan Stop Timer “S-TIME”
Beep Level “BEPV”
Scan Restart “SCAN-R”
RF Power “RFPOW”
Mic Gain “MIC”
Quiet Mode “QUIET”
Lone Worker “LONE”
Lockout “LOCK-O”
AF Minimum Level “AFMIN”
Roger Beep “RGR-B”
Own ID*
2
Battery Voltage “BATT”
*
1
Selected CTCSS or DTCS code is displayed.
*
2
5 digit Own ID is displayed.
1) Enter the Set mode.
➥
Hold down [FUNC] for 2
seconds.
2) Select the “BEEP” menu.
➥
Push [FUNC] until the
“BEEP” menu as shown to
the right is displayed.
3) Turn OFF the key beep.
➥
Push [DOWN].
4) Exit the Set mode.
➥
Hold down [FUNC] for 2
seconds.
