n
Weather channel scan
(Available with the IC-A14 only)
q
Push
[FUNC]
, then push
[WX](7)
to select a weather
channel mode.
w
Set squelch to the point where noise is just muted with
[SQL
Y
]
/
[SQL
Z
]
.
e
Push
[FUNC]
, then push
[SACN(2)
to start the scan.
• When a signal is received, the scan pauses until it disappears.
• To change the scanning direction, push
[
Y
]
/
[
Z
]
.
r
To stop the scan, push
[CLR]
.
n
Memory scan
NOTE:
Program 2 or more memory channels with “TAG”
setting to start memory scan.
q
Push
[MR]
to select memory mode.
• For IC-A14, select the desired BANK if desired. (p. 12)
w
Push
[SQL
Y
]
/
[SQL
Z
]
to set the squelch level to the
point where noise is just muted.
For IC-A14
e
Push
[FUNC]
, then push
[SCAN](2)
to start the scan.
• When a signal is received, the scan pauses until it disappears.
• To change the scanning direction, push
[
Y
]
/
[
Z
]
.
For IC-A14S
e
Push and hold
[
Y
]
/
[
Z
]
for 1 sec. to start the scan.
• When a signal is received, the scan pauses until it disappears.
• To change the scanning direction, push
[
Y
]
/
[
Z
]
.
19
5
SCAN OPERATION
Decimal point blinks during
scan.
[FUNC]
[SCAN](2)
[WX](7)
[
Y
]
[
Z
]
Decimal point blinks during
scan.
[FUNC]
[MR]
[SCAN](2)
[
Y
]
[
Z
]
r
To stop the scan, push
[CLR]
.
