background image

  

 

 7 

Programming for Status Messages 

You can set your personal status to send to another radio, or group of radios, or allow your status to be accessed 
(polled) by other radios. Status messages can be sent and received using either Individual IDs or Talk Group IDs. 
Program your radio with the following settings. All frequencies need to be entered and the squelch level must be set 
before performing this procedure. 

Memory CH Window / Zone Operation Window 

Field 

Setting/Description 

Zone Operation

 

» 

Zone Type

  

Set to 

Conventional

 (the field will show blank). 

Memory CH Window / Zone Window 

Field 

Setting/Description 

CH Type 

Set to 

Digital

 

Digital

 

»

 

Unit ID

 

Set to this radio’s ID for the applicable channels. Points to 
the ID setting in the Individual ID List window. 

Digital

 

»

 

Talkgroup ID

 

Set to desired Talk Group for each channel. 

Digital

 

»

 

Squelch Type

 

Set to 

SEL

 if you want the squelch to open with the proper 

RAN and Talk Group or Individual ID. 

Status List Window 

Field 

Setting/Description 

RX Status

 

» 

Display Text

 

Enter the text you want displayed on other radios. 

RX Status

 

» 

RX

 

Set to 

Enable

TX Status

 

» 

Display Text

 

Enter the text you want to send to other radios 

Status Setting Window 

Field 

Setting/Description 

Allow Poll 

Set to 

Enable

 if you want other radios to read your radio’s 

status. 

Poll TX 

Set to 

Enable

 if you want to be able to find out the status 

(poll) of other radios. 

Common Window 

Field 

Setting/Description 

Key & Display 

»

 

Key

 

Set one of the programmable keys to 

Digital Button

To Send a Status Message 

1.

 

Press 

and hold

 the key assigned for Digital calls. The display will briefly show INDIVIDUAL or TALKGROUP. 

If you want to change from either INDIVIDUAL or TALKGROUP, press and hold the key to return to the 
memory channel display, then press and hold to select the option you want. 

2.

 

Press the Digital key 

quickly

 to bring up the list of Talk Group IDs. 

3.

 

Scroll to the desired radio ID by pressing the Up/Down keys. 

4.

 

Press PTT. Your status message and your Individual or Talk Group ID will show on the target radio’s display. 

 

Summary of Contents for F3161 Series




























Reviews: