5
USER SETTINGS
5-7
Setting the VOX function
The VOX function can be turned ON or OFF. The VOX
function automatically switches between receive and
transmit during voice operation.
Rotate [VOL] to turn OFF the transceiver power.
1)
Set [ROTARY SELECTOR] to any channel other
2)
than Channel 16.
While holding down [PTT] and [Upper], rotate
3)
[VOL] to turn ON the power, to turn the VOX
function ON or OFF.
• When the VOX function is ON, a beep sounds.
• When the VOX function is OFF, two beeps sound.
Rotate [VOL] to turn OFF the power, then turn ON
4)
again to restart the normal operation.
NOTE:
You should turn ON the Beep function (p. 5-2)
before you start setting the VOX function.
[ROTARY SELECTOR]
[VOL]
[Upper]
[PTT]
[Lower]