BASIC OPERATION
3-2
3
D
Turning ON the transceiver
NOTE:
Before using the transceiver for the fi rst time,
the battery pack must be fully charged for optimum
life and operation� See the BASIC MANUAL for
details�
Rotate [VOL] to turn ON the transceiver�
• The battery voltage or the opening text may be
displayed, depending on the presetting.
D
Adjusting the audio level
When receiving a call, rotate [VOL] to adjust the audio
output level�
D
Entering the password
If the transceiver is preset for a Power ON Password,
“PASSWORD” is displayed when turning ON the
transceiver�
In that case, enter the password.
1�
Push the appropriate keys to enter numbers, as
described below�
Key
[Down]
Number
0
5
1
6
2
7
3
8
4
9
2�
After entering the correct password, the
transceiver automatically displays the Standby
screen�
NOTE:
If the transceiver does not display the
Standby screen after entering the password, the
entered code may be incorrect� Turn OFF the
transceiver, then ON again to reenter the password.
Standby screen (Example)
Turning ON the transceiver
[VOL]
[Rotary Selector]
