Icom D-STAR ID-4100A Advanced Manual Download Page 69

Page: 69 / 273

D-STAR OPERATION

4-32

You can save repeater information for quick and

simple communication in up to 1500 repeater memory

channels (Repeater list) in up to 50 Groups.

Entering data into the repeater list is required to use

the DR function.

You can enter four types of frequencies into the

repeater list, as shown below:

•DV repeater

•DV simplex

•FM repeater

•FM simplex

Repeater list contents

The following contents are included in the repeater

list:

•TYPE:

Frequency type (p. 4-34)

•NAME:

Repeater name (p. 4-34)

•SUB NAME:

Repeater sub name (p. 4-34)

•CALL SIGN:

Repeater call sign and port letter

(p. 4-34)

•GW CALL SIGN: Gateway repeater’s call sign and

port “G” (p. 4-34)

•GROUP:

Repeater group (p. 4-35)

•USE(FROM):

Access repeater use (p. 4-35)

•FREQUENCY:

Access repeater’s frequency

(p. 4-35)

•DUP:

Duplex direction (p. 4-35)

•OFFSET FREQ: Frequency offset (p. 4-35)

•MODE:

Operating mode (p. 4-35)

•TONE:

Tone setting (p. 4-35)

•REPEATER TONE: Repeater tone (p. 4-35)

•POSITION:

Position data accuracy level

(p. 4-36)

• LATITUDE:

Latitude of the repeater (p. 4-36)

• LONGITUDE:

Longitude of the repeater

(p. 4-36)

•UTC OFFSET:

UTC Offset (p. 4-36)

Example: “Hamacho” repeater information

TIP:

• For easy operation, the repeater list is preloaded

into your transceiver. However, if you do an All

Reset, the CPU clears all the setting data, the

memory channels, and the repeater list. We

recommend that you back up the memory data to

a microSD card or save it to a PC using the CS-

4100 cloning software.

• The repeater list can be downloaded from the Icom

website.

http://www.icom.co.jp/world/support/download/firm/

index.html

Repeater list

Previous view

Summary of Contents for D-STAR ID-4100A


















































































































































































































































































Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Related manuals for D-STAR ID-4100A

Brands by name

Popular brands

Icom D-STAR ID-4100A, Advanced Manual

Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Related manuals for D-STAR ID-4100A

Brands by name

Popular brands