manualshive.com logo in svg

Icom D-STAR ID-4100A, Advanced Manual

Share
Download
Icom D-STAR ID-4100A Advanced Manual Download Page 202

9

MENU SCREEN

9-59

Function

Description

Remote MIC Key

Up/Down MIC 

Key

[F-1]

[F-2]

[UP]

[DN]

TONE/DSQL

Push to select between tone types.

<<MODE>> FM/FM-N

TONE: 

Repeater Tone

TSQL

S

:  Pocket Beep with Tone Squelch

TSQL: 

  (Tone Squelch)

DTCS

S

:  Pocket Beep with DTCS Code Squelch

DTCS: 

 DTCS Code Squelch

TSQL-R:   Reverse  Tone  Squelch

DTCS-R:   Reverse DTCS Code Squelch

DTCS (T) (“DTCS” blinks):

 

 TX:DTCS,  RX:OFF

TONE (T)/DTCS (R) (“T-DTCS” is displayed, “T” blinks.): 

  

TX:TONE, RX:DTCS

DTCS (T)/TSQL (R) (“D-TSQL” is displayed, “D” blinks.): 

  

TX:DTCS, RX:CTCSS

TONE (T)/TSQL (R) (“T-TSQL” is displayed, “T” blinks.): 

  

TX:TONE, RX:CTCSS

<<MODE>> DV

 

L

You can set this setting on the DR screen.

DSQL

S

:  Pocket Beep with Digital Call sign Squelch

DSQL: 

 Digital Call sign Squelch

CSQL

S

:  Pocket Beep with Digital Code Squelch

CSQL: 

 Digital Code Squelch

MW

In the VFO mode or on the DR screen, hold down to save 

the displayed frequency into a Memory blank channel.

MUTE

Push to turn the Mute function ON or OFF.

Voice TX 

(T1)

 • Push to transmit the voice audio recorded on the microSD 

card once.

 • Hold down for 1 second to repeatedly transmit the voice 

audio.

 

L

This key function can also be used on the DR screen.

 

L

 If the voice audio is not saved in the [T1] (Voice memory number 

for TX) on the Voice TX record screen, this function is disabled.

DTMF 

DIRECT TX Push to display the DTMF code direct entry mode screen.

N/A

N/A

T-CALL

Push to transmit a 1750 Hz tone.

• During TX: 

●

: Default setting 

: Available  N/A: Not available

Function

Description

Remote MIC Key

Up/Down MIC 

Key

[F-1]

[F-2]

[UP]

[DN]

---

No function

●

●

●

LOW

Push to change the transmit power level.

Voice TX 

(T1)

Push to transmit the voice audio recorded on the microSD 

card once.

Hold down for 1 second to repeatedly transmit the voice audio.

- To make a repeat transmission, [PTT] must be released.

T-CALL

Push to transmit a 1750 Hz tone.

●

• During RX/Standby (Continued): 

●

: Default setting 

: Available  N/A: Not available

Function items

Previous view

Summary of Contents for D-STAR ID-4100A


















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands