Icom D-STAR ID-4100A Advanced Manual Download Page 178

Page: 178 / 273

MENU SCREEN

9-35

GPS Sentence

(Default: GGA)

GPS > GPS TX Mode > NMEA >

GPS Sentence

Select sentences to be transmitted in the GPS mode

to transmit position data.

Options: Set to between RMC, GGA, GLL, VTG, GSA

and GSV.

Information

• A maximum of four GPS sentences can be set at a

time.

•Displays “

✓

” when the sentence is set to ON.

• Even if the GPS Auto TX Timer is set to “5 sec.,”

when 4 sentences are selected, the time the GPS

Auto TX Timer is automatically changed to “10 sec.”

• “VTG,” “GSA” and “GSV” sentences will not be

transmitted when your position has been manually

set.

NOTE:

Set the GSV sentence to OFF when

sending the GPS message to conventional digital

transceivers (IC-2820H, IC-E2820, ID-800H, IC-

91AD, IC-E91, IC-V82, IC-U82, IC-2200H).

The GSV sentence is incompatible with them. Those

transceivers will not display GPS messages properly

if sent as a GSV sentence from the ID-4100A/E.

GPS Message

GPS > GPS TX Mode > NMEA >

GPS Message

Enter a GPS message of up to 20 alphanumeric

characters. (p. 5-26)

NOTE:

When you do not want to send a message,

delete the entered message.

GPS items (Continued)

TIP: Contents of GPS sentence

The Time Stamp is shown based on the UTC (Universal Time Coordinated) time.

Sentence Lat/Lon Alt

GPS Time

Stamp (UTC)

Date

(UTC) Status 2D/3D

COG

(True)

SOG

(knot)

RMC

✔

GGA

✔

GLL

✔

VTG

✔

GSA

✔

GSV

Sentence

Others

RMC

Magnetic Variation, Mode Indicator

GGA

Number of used satellites, HDOP, Geoidal separation, Age of Differential GPS data,

Differential reference station ID

GLL

Mode Indicator

VTG

COG (Magnetic north), SOG (km/h), Mode Indicator

GSA

PRN number of satellites, PDOP, HDOP, VDOP

GSV

Total number of sentences, Sentence number, Total number of satellites in view,

Satellite information (ID, Altitude, Azimuth, S/N)

Previous view

Summary of Contents for D-STAR ID-4100A


















































































































































































































































































Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Brands by name

Popular brands

Icom D-STAR ID-4100A, Advanced Manual

Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Brands by name

Popular brands