Icom D-STAR ID-4100A Advanced Manual Download Page 171

Page: 171 / 273

MENU SCREEN

9-28

Object Name

GPS > GPS TX Mode > D-PRS > TX Format > Object

Object Name

Enter an Object name of up to 9 characters.

Data Type

(Default: Live Object)

GPS > GPS TX Mode > D-PRS > TX Format > Object

Data Type

Set the Object’s status.

•Live Object: The Object is valid.

•Killed Object: The Object is invalid.

Symbol

(Default: Radio)

GPS > GPS TX Mode > D-PRS > TX Format > Object

Symbol

The symbol is an icon which represents Object’s

means of transportation or location. The saved symbol

is transmitted along with the position data while in the

D-PRS mode.

See page 9-25 for the s

ymbol list.

Editing a symbol

1. Push [QUICK].

2. Rotate [DIAL] to select “Direct Input,” then push

[

3. Push [MW] to move the cursor to the second digit,

or push [MODE] to move the cursor to the first

digit.

4. Rotate [DIAL] to select a character or symbol to

the selected digit.

Selectable characters and symbols

<For the first digit>

/, \, 0 to 9, A to Z

<For the second digit>

A to Z, a to z, 0 to 9, ! " # $ % & ’ ( ) * +
, - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ˜

5. Push [

] to set the symbol.

Selecting a preset symbol

1. On the “Symbol” screen, rotate [DIAL] to select

the symbol.

2. Push [

] to set the symbol.

Comment

GPS > GPS TX Mode > D-PRS > TX Format > Object

Comment

Enter a comment.

The number of characters you can enter differs,

depending on the Data Extension and Altitude data

entry.

Data Extension

Altitude

Characters

entered

(maximum)

OFF

—

43 (Default)

OFF

Entered

Course/Speed

—

Course/Speed

Entered

Power/Height/Gain/Directivity

—

Power/Height/Gain/Directivity Entered

The symbol “ ” shows the transmittable comment

range. Please note that the characters that exceed the

range will not be transmitted.

Transmittable comment range display

(In case of up to 28 characters)

GPS items (Continued)

Previous view

Summary of Contents for D-STAR ID-4100A


















































































































































































































































































Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Brands by name

Popular brands

Icom D-STAR ID-4100A, Advanced Manual

Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Brands by name

Popular brands