New2001
4
2
ABOUT USING A MICROSD CARD
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
■
Inserting the microSD card
Turn OFF the transceiver.
q
Lift OFF the [micro SD] slot cover on the side panel.
w
With the terminals facing the front, insert the card into the
e
slot until it locks in place, and makes a ‘click’ sound.
r
Firmly close the [micro SD] slot cover.
BE CAREFUL!
•
NEVER
insert the card with the terminals facing the back
or
NEVER
insert it slanted. That will damage the card or
the slot.
•
DO NOT
touch the terminals.
• To
remove the card, push in to release it, then carefully
pull the card out.
• While reading or writing data from and to the card,
NEV-
ER
remove the card. It will corrupt the data or damage
the card.
■
Format the microSD card
When using a preformatted brand new microSD card, format-
ting is not necessary. However, we recommend you format it
in the following way to get card’s best performance.
IMPORTANT!
Formatting a card erases all its data. Before formatting any
programmed card, make a backup file onto your PC.
Turn ON the transceiver.
q
Push [MENU]
w
to enter the
Menu screen.
Push D-pad(
e
E
) to select the root item
(SD Card), then push D-pad(Ent).
D-pad
(
�
)
(Ent)
r
Push D-pad(
E
) to select “Format,”
then push D-pad(Ent).
• The confirmation screen “Format OK?”
appears.
t
Push D-pad(
#
) to select “YES,” then
push D-pad(Ent) to format.
• The formatting starts and the display
shows the formatting state.
• After formatting, the display automati
-
cally returns to the SD CARD menu.
y
Push [MENU]
to return to the
frequency display.
[micro SD] slot
microSD card
Terminals facing
the front
Slot cover
Formatting state
Summary of Contents for D-STAR ID-31A; D-STAR ID-31E
Page 76: ...67 MEMO ...
Page 77: ...68 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 MEMO ...
Page 78: ...69 MEMO ...
