4
DR MODE <ADVANCED>
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
4-13
■
Speech function
The speech function announces the called station call
sign, or the individual or station call sign that is se-
lected from the RX History by holding down
and
rotating [DIAL]. (Default: ON (Kerchunk))
It is convenient when you cannot watch the LCD, or
you missed the call’s audio.
This function helps you to know the call sign of the
caller station without seeing the LCD.
D
To announce the received call sign
The received call sign can be announced.
Push [MENU]
q
.
Push D-pad(
w
) to select the root item (“SPEECH”),
and then push D-pad(Ent).
Push D-pad(
e
) to select “RX Call Sign SPEECH,”
and then push D-pad(Ent).
Push D-pad(
r
) to select “ON (Kerchunk)” or “ON
(All).”
• ON (Kerchunk) : When a DV call is received, and if the
call time is short, the calling station’s
call sign is announced.
• ON (All)
: When a DV call is received, the calling
station’s call sign is announced.
Push [MENU]
t
to exit the MENU screen.
• When a DV call is received, the standby beep sounds,
and after approximately 1 second, the call sign is an-
nounced.
NOTE:
• Even if a “/” and a note are after a call sign, they
are not announced.
• The announced contents cannot be recorded on
the microSD card.
When the digital squelch function is used, and if a
received signal is not addressed to your call sign, or
does not include an unmatched digital code, the call-
ing station’s call sign is not announced.
‘
JM1ZLK
’
‘
JM1ZLK
’
‘
Are y
ou listening?
’
• When “ON (Kerchunk)” is selected
• When “ON (All)” is selected
D-pad
(
�
)
(Ent)
Previous view
