5
OTHER FUNCTIONS
5-8
4. Using the Packet Filter (Continued)
Network Settings > Packet Filter
e
Limiting the AP-90M setting screen access to only the administrator’s PC
You must register filters
q
and
w
.
• The VLAN ID is set to “0” as an example.
• To prevent to disturb the access to the web screen from the setting station, carefully add or delete the entries.
To add an entry, enter “Pass” to filter 1, and then “Block” to filter 2.
To delete an entry, delete “Block” and then “Pass.”
AP-90M
Administrator PC
Setting Screen
e
Virtual AP (ath0)
Virtual AP (ath1)
A
q
Enables the AP
management PC to
access the AP-90M
setting screen.
The number set on the
“Packet Filter” screen is
displayed.
Set a higher number than
the number set to the filter
above.
The IP address set to
the administrator’s PC.
w
Disables other than
the AP management
PC to access the
AP-90 setting
screen.
