SYSTEM ACTIVATION DUE TO FIRE (LIVE ACTIVATION)
If your iCO
®
Water Mist System has activated due to a fire, please follow the below instructions with due care.
In a domestic or single dwelling property you should evacuate the building and
alert the fire brigade
.
In a residential, multiple dwelling or HMO property you should follow the fire action plan of your building.
Following evacuation do not re-enter the building until the fire brigade has indicated that it is safe to do so.
Once it has been deemed safe to re-enter the property, the iCO
®
system will need to be turned off by following the
instructions below. It is important that you do not attempt this until instructed by the fire brigade.
1. Close the inlet isolation valve. This will stop the pump from running.
2. Switch power off to the pump.
3. Contact your installation company to re-instate and re-commission your system.
* To run the pump again open the isolation valve and switch the power on.
iCO
®
High Pressure Water Mist System End User Manual
This manual should be kept adjacent to the pump along with the
commissioning & maintenance certificates for the system.
Actions following a system activation
.
2. Switch power off
to the pump.
1. Close the inlet isolation valve
to stop pump running.
2
