background image

2

©Copyright 2021, Infrared Cameras, Inc. - All rights reserved. The 

contents of this document may not be reproduced in whole or in parts 

without the written consent of the copyright owner.

Printed in the United States of America.

2105 W. Cardinal Dr.

Beaumont, TX 77705

(866) 861-0788

www.infraredcameras.com

Revision: 6.2021-002

THE MANUFACTURER RESERVES THE RIGHT TO ALTER THE 

SPECIFICATIONS OF THE PRODUCT WITHOUT PRIOR NOTIFICATION. THE 

MANUFACTURER ALLOWS HIMSELF THE RIGHT TO MODIFY WITHOUT 

ANY PRELIMINARY OPINION THE TECHNICAL SPECIFICATIONS OF THE 

PRODUCT. THIS MANUAL MAY CONTAIN TECHNICAL INACCURACIES OR 

TYPOGRAPHICAL ERRORS.

NOTICE ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN 

THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED 

WITHOUT WARRANTY OF ANY KIND. NOTWITHSTANDING ANY OTHER 

WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE ARE 

PROVIDED “AS IS” WITH ALL FAULTS. ICI DISCLAIMS ALL WARRANTIES, 

EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE 

OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 

NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, 

OR TRADE PRACTICE.

THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE 

ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION 

PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED 

HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE 

SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR ICI 

REPRESENTATIVE FOR A COPY.

IN NO EVENT SHALL ICI BE LIABLE FOR ANY INDIRECT, SPECIAL, 

CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT 

LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING 

OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF ICI HAS 

BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Summary of Contents for T-CAM 380 Series












Reviews: