ICI PIVOT-IR User Manual Download Page 53

Page: 53 / 54

PIVOT-IR USER MANUAL

11-6 Memory card error

•

Format the internal memory

•

Perform a factory reset

11-7 Temperature readings are incorrect

•

Turn off the device; then, turn it back on

•

To ensure the accuracy of temperature measurement, it is recommended

to wait for 5 to 10 minutes after turning on the thermal imager and before

attempting to take temperature measurements.

•

Ensure the correct temperature range is selected:

◦

The default temperature range is -20 °C to 150 °C (-4 °F to 302 °F)

◦

When measuring high temperature objects ensure the temperature

range is set to the 100 °C to 500 °C (212 °F to 932 °F) range

•

Ensure device is at proper height

•

Adjust the distance to the target

•

Adjust

the distance setting

•

Adjust

the

emissivity

setting

•

Adjust the ambient temperature

setting

•

Perform a manual NUC operation

•

Send the device in for recalibration

Summary of Contents for PIVOT-IR























































Search results

Summary of Contents for PIVOT-IR

Reviews:

Related manuals for PIVOT-IR

Brands by name

Popular brands

ICI PIVOT-IR, User Manual

Search results

Summary of Contents for PIVOT-IR

Reviews:

Related manuals for PIVOT-IR

Brands by name

Popular brands