IR-PAD SERIES USER MANUAL
29
11-8 Memory error
•
Clear temporary files
•
Perform a disk cleanup
11-7 Temperature readings are incorrect
•
Turn off the device; then, turn it back on
•
To ensure the accuracy of temperature measurement, you are recommended
to wait for 5 to 10 minutes after turning on the thermal imager and before
measuring temperatures.
•
Ensure the correct temperature range is selected
•
Device is at proper height
•
Device is at proper angle
•
Ensure device is in focus
•
Adjust emissivity
•
Adjust humidity
•
Adjust for ambient temperature
•
Wait for or perform a manual NUC operation
•
Send the device in for recalibration
11-5 Attached camera is out of focus
•
For FMX devices, use the focus settings of the software
•
For devices with focus lens adjusters, turn the adjuster right or left
•
For devices without focus lens adjusters, change the distance between
camera and subject
11-6 Temperature data is missing or has strange readings
•
Close and reopen software
•
Camera has to be powered on for 15 minutes
5 to 10 minutes before
measuring temperatures
•
Ensure camera is away from direct sunlight
•
Try newer version of IR Flash software