I-CAM 380/I-CAM 640 P-SERIES USER MANUAL
43
8-14-3-3
Free Hand Analysis Objects
Users can draw analysis object by hand as follows:
1.
Using the touchscreen, tap the Tools icon. A side menu appears.
2. Tap the live drawing icon.
3. Draw on the touchscreen by following the on screen prompts.
4. When user is finished drawing, tap the check mark located to the right to
begin gathering temperature data. Tap the X in the upper right corner to
discard drawing without gathering temperature data.
8-14-3-4
Temperature Differential Analysis (△T)
Determine the difference in temperature between two points using the
temperature differential analysis function know as Delta T as follows:
1.
Create at least two analysis objects.
2. Using the touchscreen, tap the Tools icon. A side menu appears.
3.
Press down on the Thumbstick to scroll through the menu until the △ icon
is visible.
4.
Tap on the △ icon to enable the temperature differential analysis function.
Menu closes automatically. New analysis objects cannot be created while
the function is enabled. Skip to Step 6 if new analysis objects are required.
5. Select two analysis objects following the on screen prompts. Radiometric
information is displayed in the upper left corner.
6. When analysis is finished, tap the Tools icon. A side menu appears.
7. Press down on the Thumbstic
k to scroll through the menu until the △ icon
is visible.
8.
Tap on the △ icon to disable the temperature differential analysis function.
Menu closes automatically. New analysis objects can now be created.
2.
NEW ANALYSIS OBJECTS CANNOT BE CREATED WHILE THE TEMPERATURE
DIFFERENTIAL ANALYSIS FUNCTION IS ENABLED. DISABLE THE DELTA T
FUNCTION TO CONTINUE GATHERING TEMPERATURE DATA.
