I-CAM 380/I-CAM 640 P-SERIES USER MANUAL
38
8-13 Interval Photography/Videography
8-13-1 Photography Settings
Interval photography allows for the auto saving of images at regular intervals.
Images are taken at a user defined frequency and cannot be programmed to
capture images when a temperature threshold is exceeded.
Interval photography is disabled by default. Enable the feature and change the
frequency as well as number of images to be captured as follows:
1.
Press the Menu button to open the main menu. The Record Mode
(abbreviated Rec Mode) tab should be open by default.
2. Using the touchscreen, toggle the Camera Timer (abbreviated Cam Timer)
setting to the On position by tapping the switch. The switch will turn green
when active and new settings will appear. Disable the timer by tapping the
switch again.
3. Tap Time Interval. A rotary menu appears.
4. Use the rotary dials to set minutes and seconds by pressing-and-holding
the on screen dials one at a time; then, drag up or down on the touchscreen
to set parameters.
5. Press the Back button to exit the rotary menu.
6. Tap Total Images. A rotary menu appears.
7. Press up or down on the Thumbstick to define the number of images to be
captured.
8. Press the Back button to exit the rotary menu.
9. Press the Back button to exit the main menu.
8-12-2 Disable Panoramic Imaging
Turn off Panorama mode as follows:
1.
Using the touchscreen, t
ap-and-drag upwards on the Quick Access Menu
bar located at the bottom of the screen. Quick Access Menu opens.
2. Tap the Panorama button. Feature turns gray with disabled. Menu closes
automatically
.
2.
3.
6.
1.
