458DUO
Dual Balance Charger/Discharger/DC Power
- 16 -
LiPo/LiIo/LiFe/LiHV/LTO/NiZn /User Setup
After adding a program, it will switch to LiPo/LiIo/LiFe/LiHV/LTO/NiZn/User battery in
Type
option on the
MEMORY
SETUP
interface, and set the number of
cells
and
capacity
,
if there is no setting for the number of cells, the charger will set
Auto
by default. After editing all parameters for the program, click "Save" to save and return to the previous interface.
As shown in the above picture, there are Charge, Storage, Discharge, Cycle and Balance Only for
LiPo/LiIo/LiFe/LiHV/LTO/User., while Charger, Discharge and Cycle for Nizn user only.
LiPo/LiIo/LiFe/LiHV/LTO/NiZn/User Charge Setup
Select
Program
→
Charge
to enter
Charge
setup interface.
1. When the value of charge cells voltage exceeds the recommended value (LiPo 4.2V, LiIo 4.1V, LiFe 3.6V, LTO
2.85V), the charger will display a warning and alarm. As long as the user changes the values, the battery types and cells
voltage value on the main charging interface will be displayed alternately.
2. For the setting process for all program in this manual, tick
Show to
display the setting program on
MEMORY
SETUP
(shown in the following picture), and vice versa; the built-in memory is ticked by default.
LiPo/LiIo/LiFe/LiHV/LTO/NiZn/User NON-Balance Charge Setup
When switch to
Not
Balance
on
Chg Mode
, only
Chg End Current
is available for charging end condition, and “
Set …
”
behind
Chg Mode
and
Chg End Current
are inactive.
Chg Current:
0.05A-45A; default: 2A
Chg Mode:
Slow Balance, Normal Balance( default),
Fast Balance, User Balance, Not Balance
Chg End Current:
1%-50%; default: 10%
Chg Cell Volt:
LiPo
3.85V/Cell-4.35V/Cell
；
default
：
4.2V/Cell
LiIo
3.75V/Cell-4.35V/Cell
；
default
：
4.1V/Cell
LiFe
3.30V/Cell-3.80V/Cell
；
default
：
3.6V/Cell
LiHV
3.90V/Cell-4.45V/Cell
；
default
：
4.35V/Cell
LTO
2.50V/Cell-3.10V/Cell
；
default
：
2.85V/Cell
NiZn
1.20V/Cell-2.00V/Cell
；
default
：
1.90V/Cell
User
1.00V/Cell-4.80V/Cell
；
default
：
1.00V/Cell
Cells
：
Auto(default), 1-8S
Capacity
：
Ignore(default),50-999900mAh
