39
38
Stopper installation and oil refuel method
There can be vibration on the machine when generating ice cream. To prevent looseness of joint
bolts, we provide the stopper, so please install it.
* Please note that the manufacturer is not responsible for the troubles caused due to uninstalling
the stopper.
1. Insert the stopper into the hole of the bolt at the top and
turn it clockwise to tighten the loose bolt.
2. As shown in the right image, insert the bottom part of
the stopper into the hole of the bottom bolt, so that the stopper
can be installed in a straight line.
3. When the installation is completed, please make sure if it is
in the shape like the image and insert the stopper completely.
【 STOPPER INSTALLATION 】
STOPPER
JOINT BOLT
1. Remove the side panel.
(Unloose the ①,②,③,④ bolts and you can take out
the side panel. Please remove it in order of A,B.)
When you open the panel, the feeder part will be shown.
2. Please inject 2~3 drops of oil in the ①,
②, ③, ④, ⑤, ⑥ parts shown in the right
image.
* OIL REFUEL PERIOD : Refer to the 45P
* The oil is included in the
accompanying components.
3. Assemble the side panel in the reverse
order.
【 OIL REFUEL METHOD 】
①
①
A
B
②
②
③
③
④
④
⑤
⑥
