icetro ID-H150-22, Product Manual

Page: 20 / 24

20
W
e T
hink of Cus
tomer S
at
is
fac
tion
14. Service Diagnosis
Occurrence Possible cause Actions
Ice is not ejected
No power
Make sure the dispenser is receiving
adequate power.
No ice Check the ice maker
Door switch not closed
Check the door switch
Check the chute for proper movement
Does the button work properly?
Check that the door lock is
working properly.
Door switch open
Check that the front panel is pressing
the door switch.
Drive motor winding open Check the drive motor
Drive gear failure Check the gear reducer
Ice does not come out
No ice Check the ice maker operation
Mixing bar rotation failure
Check drive motor
Check Pcb output
Rotating wheel discharging only
a small amount of damaged ice
Plastic wheel damaged Replace wheel
LED not lit Wire broken Check for wire broken and PCB
Leak
The drain is clogged.
Check if there are any restrictions
on the drain
The drain pan is full Remove excess ice
Leakage at the hose connection of
the drain pan
Check clamp tightening
Drainage clogging Clean the waterspout
Water droplets from the spout A few drops of water are normal Check spout drainage
Not recognized
by card injection
Check the microswitch Replace the switch