icetro ID-H150-22, Product Manual

Page: 11 / 24

11
6.Unpacking
After removing the packaging, check the control foot packaging in the storage container.
Install the product by inserting the bolt part of the control foot all the way to the bottom of the
product. Turn the control foot so that the product is level and fix the installation position.
Check where the drain line and electrical connections can be made.
Remove the front panel
Remove the 2 screws on the top lid and lift it up.
The front panel opens by pulling it forward, and the middle hook holds the front panel so you
can see the inside.
The lower part is fitted over the base.
To remove the front panel, loosen the hook and disconnect all the connectors for the wire
housing before removing it.
Control foot
connection link connection connector
Paddle
wheel